capacitor specification ALS30A152KF450 part number : customer : customer p/n : capacitance: 1500 lower cap tolerance: 20 upper cap tolerance: 20 working voltage: 450 surge test voltage: 495 terminals m5 other dimensions s=22.20.5, t=5.50.5, lt=110.51.0 rated ripple current 7.7 a rms at 100 hz and 85 diameter (mm) 51 +/-1 length (l or l2) (mm) 105 +/-2 temperature range 85 c to -40 c c uf % % v v dc dc 93 65 4.05 450.0v dc esr m'ohms max @ 100 hz,20c impedance m'ohms max @ 10 khz,20c dc leakage ma max @ test volts test voltage t s l lt ?+? sign 13mm safety vent 10mm + ?d measurement from deck surface to top of terminal form : fm003.des iss : 3 date :30/06/1 a pproved______________________ date__________ _ all product specifications, statements, information and data (collectively, the ?information?) are subject to change without no tice. all information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. statements of suitability for certain applications ar e based on our knowledge of typical operating conditions for such applications, but are not intended to constitute ? and we specifically disclaim ? any warranty concerning suitability for a specific customer application or use. thi s information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained. although we design and manufacture our products to the most stringent quality and saf ety standards, given the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all product-relate d warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be requ ired. kemet's product warranty is set forth at www.kemet.com under terms and conditions of sale.
|
